Floor Cleaning at Lincon Batteries
At Lincon Batteries we offer an array of batteries and chargers which can be used in a multitude of floor cleaning applications. Please call us for more information and we will be happy to assist.
Brand Links
Summary of Floor Cleaning Battery Range
Crown’s modern one-piece solid-cast design provides a lower internal resistance so charging and discharging are optimum, providing a longer battery life. Dense TBLS (tetra-basic lead sulphate) crystal content in the positive plate ensures more resistance to breakdown for longer life and consistent performance.
Crown’s Quality System is ISO-9001:2008 certified, meaning they have the capability to design, develop and build best-available battery products that work better and last longer. Crown Battery’s quality system identifies key metrics such as customer satisfaction, process management and process results analysis to drive continuous improvement.
Crown1 is a sealed deep-cycle AGM battery which boasts a robust design which tolerates deep discharge and maximum safety due to the sealed, spill-proof design which is easy to deploy. This maintenance free battery has a dual terminal design which ensures multiple application fulfilment. Crown1 has a thicker plate construction with more active materials and an inset plate which delivers longer discharge times and an increased tolerance for deep-cycle service leading to an increased performance in comparison to flooded batteries.
The Sterling H, HP and HPX Series are the perfect replacements for many applications including: stand-by power, emergency lighting, phone systems as well as many others. These series utilise Sterling's unique electrolyte suspension system incorporating a microfiber glass mat to retain the maximum amount of electrolyte in the cells. The electrolyte is retained in the separator material and there is no free electrolyte to escape from the cells. The design of this series battery incorporates the very latest oxygen recombination technology to effectively control the generation of gas during normal use. Sterling's unique construction and sealing technique ensures no electrolyte leakage from case or terminals. The batteries are equipped with a simple, safe low pressure venting system which releases gas and automatically reseals should there be a build up of gas within the battery due to severe overcharge.
Our HDC series are AGM batteries that have been designed for cyclic applications, whilst maintaining all the added advantages of starved electrolyte” technology; fast charging, very low gassing, wide temperature range, , high capacity per mono bloc, can be operated in any orientation and is offering a design Life of up to 10 years at 20°C.
The SECUK HGB Pure Gel Battery has design features such as true thixotropic gelled electrolyte to improve cycling capability, offering deep discharge operations, high number of cycles, up to 30 days discharge protection and can be used in any position with a wide temperature range. With a design life up to 10 Years the HGB Battery is of robust construction where the electrolyte is suspended within a Silicon Gel, this holds the lead plates firm under any shock and vibration conditions. The HGB Gel battery incorporates valve regulation technology giving high cyclic capability, deep discharge characteristics and deep discharge protection, therefore these Gel batteries are highly suited for cyclic applications, critical energy and high discharge applications. SECUK Gel batteries best operate between temperatures of -30°C to +45°C.
The Front Terminal HFTA Series are AGM technology batteries with a terminal configuration designed for racks and cabinets. Robust copper terminals located at the front of the battery providing high conductivity, easy installation and low maintenance. Thick pasted plates with high quality High Tin Calcium alloy grids provide long operation life, up to 12 Design Life, high rate discharge and fast recharge. Battery sizes are 12 volt ranging from 55 to 200 Ah and can be supplied in either ABS or Flame Retardant casing (V-0 casing upon request). Main application for this series includes Security, Telecommunications and Control Systems. These batteries operate between temperatures of -30°C to +45°C.
Lithium Phosphate Rechargeable batteries have characteristics that offer fast recharging, light weight mono blocs and battery solutions, wide operating temperature range, excellent cycling performance (up to 3000 cycles), low internal resistance, give high efficiency and a flat terminal voltage, therefore 100 % of the battery’s capacity can be accessed. Our LiFEPO4 HLPH battery can be fully charged under a wide temperature range, to the 100 % point in a matter of a couple of hours using the correct charger or Solar System. SEC UK can design bespoke battery pack solutions or standard mono bloc batteries to suit all specifications, whatever the voltages and capacity requirements are. Applications include off-grid solar and/or wind, Leisure Market; where fast recharge time is important. The LiFEPO4 has an initial high cost compared to traditional battery types, but compensated by longer service life, superior reliability and excellent efficiency.
The Lincon Gel battery offers reliable cold cranking (starting power) and maximum power supply with a superior cycling performance. The robust construction ensures the battery will continue to work through the most extreme conditions with a high resistance to vibration. The battery is exceptionally clean and safe to handle, with the battery acid fixed using Gel making the battery completely leak proof, allowing the battery to be put on its side. The Gel battery incorporates gas recombination technology, ensuring neither gas nor acid vapours are able to escape, making it completely maintenance free. The slow self-discharge rate of the battery plus its capability of recovery after deep discharge makes it ideally suited for seasonal or infrequent use.